pi@raspberrypi ~ $ sudo apt-get update
pi@raspberrypi ~ $ sudo apt-get upgrade
pi@raspberrypi ~ $ cat <no-rtl.conf
blacklist dvb_usb_rtl28xxu
blacklist rtl2832
blacklist rtl2830
EOF
pi@raspberrypi ~ $ sudo mv no-rtl.conf /etc/modprobe.d/
pi@raspberrypi ~ $ sudo apt-get install git-core
pi@raspberrypi ~ $ sudo apt-get install git
pi@raspberrypi ~ $ sudo apt-get install cmake
pi@raspberrypi ~ $ sudo apt-get install libusb-1.0-0-dev
pi@raspberrypi ~ $ sudo apt-get install build-essential
pi@raspberrypi ~ $ git clone git://git.osmocom.org/rtl-sdr.git
pi@raspberrypi ~ $ cd rtl-sdr/
pi@raspberrypi ~/rtl-sdr $ mkdir build
pi@raspberrypi ~/rtl-sdr $ cd build
pi@raspberrypi ~/rtl-sdr/build $ cmake ../ -DINSTALL_UDEV_RULES=ON
pi@raspberrypi ~/rtl-sdr/build $ make
pi@raspberrypi ~/rtl-sdr/build $ sudo make install
pi@raspberrypi ~/rtl-sdr/build $ sudo ldconfig
pi@raspberrypi ~/rtl-sdr/build $ cd ~
pi@raspberrypi ~ $ sudo cp ./rtl-sdr/rtl-sdr.rules /etc/udev/rules.d/
pi@raspberrypi ~ $ sudo reboot
pi@raspberrypi ~ $ rtl_test
Found 1 device(s):
0: Generic, RTL2832U, SN: 77771111153705700
Using device 0: Generic RTL2832U
Found Rafael Micro R820T tuner
Supported gain values (29): 0.0 0.9 1.4 2.7 3.7 7.7 8.7 12.5 14.4 15.7 16.6 19.7 20.7 22.9 25.4 28.0 29.7 32.8 33.8 36.4 37.2 38.6 40.2 42.1 43.4 43.9 44.5 48.0 49.6
Sampling at 2048000 S/s.
Info: This tool will continuously read from the device, and report if
samples get lost. If you observe no further output, everything is fine.
Reading samples in async mode...
pi@raspberrypi ~ $ sudo apt-get install libasound-dev
pi@raspberrypi ~ $ sudo apt-get install libpulse-dev 
